guest in

Guidelines For Using Your own Sky UK Card With Your Dreambox 600

1 post / 0 new
adrienneh
Guidelines For Using Your own Sky UK Card With Your Dreambox 600

In NewCS it's no spaces, one example is :-
072A86FF

In CCcam you specify the reader first then the boxkey and contains a space after each byte, as an example :-
BOXKEY: /dev/sci0 07 2A 86 FF

Available Choices that can be used the card.

Internal Dreambox Reader.
Smargo Smartreader+
Omnikey 3121
The software you need to use varies somewhat dependant upon the various readers choice.

Using the internal reader you've got the subsequent alternatives to run the card.

CCcam 2.1.3 will run the card perfectly and it will up-date the entitlements without additional intervention. Experiences vary on how hot a card gets but there are not any claims at all of any individual burning up the card.
NewCS 1.67 RC1 will host the card really well. However, the use of CCcam to connect with the NewCS server, it doesn't up-date the card. So that you can update the card you'll want to have one or more client connected working with MGCamd. That can be the exact same box, or another one.

Use the Smargo reader

CCcam 2.1.3 will run the card perfectly and will update the entitlements without the need for further involvement.
NewCS 1.67 RC1 will host the card perfectly. However, if you are using CCcam to connect to your NewCS server, it will NOT update the card. For you to update the card you need at least one client connected utilising MGCamd. That could be the same receiver, or another one. Don't forget to utilize right binary file which contains USB support while using the Smargo reader. If you ever install NewCS 1.67 through the Qbox addons panel, its more than likely the Omnikey reader won't work together with that version. Within the official NewCS release zip file, the file you absolutely need in the Dreambox is referred to as newcs.ppc.usb for enigma1 boxes or newcs.mips.usb for enigma2 boxes. You'll need to set up this personally and relabel it or edit any cam scripts to suite.

Use a Omnikey Reader

NewCS is definitely the only accessible option whenever using this reader as CCcam is not going to support PCSC type readers. NewCS 1.67 RC1 will host the card completely well. However, when you use CCcam for connecting on the NewCS server, it will NOT update the card. As a way to bring up to date the card you require at least one client connected using MGCamd. That may be the identical box, or another one. Ensure that you use the correct binary file with which has PCSC support with the Omnikey reader. For those who install NewCS 1.67 from the Azbox addons panel, its very likely the Omnikey reader will not likely use that version. Through the official NewCS release zip file, the file that you need for your Dreambox is named newcs.ppc.pcsc for enigma1 receivers or newcs.mips.pcsc for enigma2 boxes. You'll want to install this manually and rename it or edit any cam scripts to suite. Lastly, remember to install the PCSC drivers to your Dreambox 500 before trying to use an Omnikey reader. One can find a good article on the subject of using this useful web page Cccam cardsharing Premium. This kind of procedure also works into Cccam.